Cisco C9610 Series Supervisor Engine 3XL - 4x Cisco Silicon One K100 With HBM - Supports 400G QSFP-DD, Enhanced App Hosting - 6.4 Tbps per Slot - C9610-SUP-3-XL

Supervisor Engine 3XL use cases:

• C9610-SUP-3-XL is specifically designed for customers focusing on L3 (core or edge) deployments with large L2 and L3 forwarding scale, and optimized ACL scale with HBM.
• Intended for campus gateway (internet) deployments that require high IPv4 or IPv6 route scale.
• Provides bandwidth for dense high-speed interfaces from 10G-50G SFP and 40G-400G QSFP, with deep 256MB + 8GB QoS buffers.
• Suitable for high-scale VXLAN deployment as SDA LISP or BGP EVPN border/spine nodes.

Supervisor Engine 3XL highlights:

• The C9610-SUP-3-XL model features 4x Cisco Silicon One K100 forwarding ASICs connected via a Q200L fabric ASIC.
• Cisco Silicon One K100 ASIC is designed for the next-generation campus distribution core , core and campus gateway switch. Each K100 ASIC offers speeds up to 12.8 Tbps (6.4 Tbps full duplex) with up to 3.9 Bpps of forwarding performance. 
• Cisco Silicon One Q200 ASIC offers speeds up to 25.6 Tbps (12.8 Tbps full duplex) with up to 8 Bpps of forwarding performance. 
• Cisco Silicon One K100 and Q200 ASICs includes an 8GB on-chip 2.5D high-bandwidth memory (HBM2E) for deep packet buffers and route table expansion.
• 64MB of dedicated low-latency buffer with up to 8GB of HBM buffer per K100 ASIC.
• Intel 2.0-GHz x86 CPU with 8 cores and 32GB of DDR4 memory.
• Up to 960 GB of SATA SSD local storage for container-based application hosting (2x 10G SFP+ management ports).
• ASIC tables for switching scale up to 128K MAC addresses and IP routing scale up to 2M routes.
•  IPv6 support in hardware provides wire-rate forwarding for IPv6 networks.
• Dual-stack support for IPv4 and IPv6 and dynamic hardware forwarding table allocations enable easy IPv4-toIPv6 migration.
• Flexible routing (IPv4, IPv6, and multicast) tables, L2 tables, ACL tables, and QoS tables.

Datasheet