Cisco C9610 Supervisor Engine 3 - 4x Cisco Silicon One E100 - Supports 400G QSFP-DD - 6.4 Tbps per Slot - C9610-SUP-3

Supervisor Engine 3 use cases:

• C9610-SUP-3 is specifically designed for customers focusing on deployments with medium-large L2 and L3 forwarding scale, medium-large ACL, QoS & FNF feature scale, and medium-large throughput.
• Intended for campus distribution layer with a focus on L2 MAC address and L3 ARP/NDP scale.
• Provides bandwidth for medium-density high-speed interfaces from 10G–50G SFP and 40G-400G QSFP with 256MB of built-in QoS buffers.

Supervisor Engine 3 highlights:

• The C9610-SUP-3 model features 4x Cisco Silicon One E100 forwarding ASICs connected via a Q200L fabric ASIC.
• Cisco Silicon One E100 ASIC is designed for the next-generation campus distribution core and core switch. Each E100 ASIC offers speeds up to 12.8 Tbps (6.4 Tbps full duplex) with up to 3.9 Bpps of forwarding performance. 
• Cisco Silicon One Q200 ASIC offers speeds up to 25.6 Tbps (12.8 Tbps full duplex) with up to 8 Bpps of forwarding performance.
• 64MB of dedicated low-latency shared-memory system (SMS) buffer per E100 ASIC.
• Intel 2.0-GHz x86 CPU with 8 cores and 32GB of DDR4 memory.
• Up to 960 GB of SATA SSD local storage for container-based application hosting (2x 10G SFP+ management ports).
• ASIC tables for switching scale up to 128K MAC addresses and IP routing scale up to 1M routes.
• IPv6 support in hardware provides wire-rate forwarding for IPv6 networks.
• Dual-stack support for IPv4 and IPv6 and dynamic hardware forwarding table allocations enable easy IPv4-to-IPv6 migration.
• Flexible routing (IPv4, IPv6, and multicast) tables, Layer 2 tables, ACL tables, and QoS tables. 

Datasheet