APC by Schneider Electric Back-UPS Pro BR1000MS 1.0KVA Tower UPS - Tower - 16 Hour Recharge - 3.70 Minute Stand-by - 120 V AC Input - 120 V AC Output - 4 x NEMA 5-15R, 6 x NEMA 5-15R 10OUT 2 USB CHARGING PORTS
Provides protection of connected equipment from power surges on the data lines and reduces line noise that can cause data loss and keyboard errors. LCD interface has text and mimic diagrams that display modes of operation, system parameters and alarms 10 Outlets and 2 USB Charging Ports. Includes coaxial cable, USB cable and user manual. 1000 VA/600 W. Backup time at 180W load: 23.1 minutes. Standard 3-year warranty.
- Audible alarms - Provides notification of changing utility power and UPS power conditions
- Automatic self-test - Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- Battery replacement without tools - Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
- Boost and Trim Automatic Voltage Regulation (AVR) - Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
- Building Wiring Fault Indicator - This LED informs users of potentially dangerous wiring problems in the wall circuit.
- Catastrophic Event Protection - Basic Surge Protector components such as MOVs and Thermal fuses ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike APC Surge Protector products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.
- Dataline surge protection - Provides protection of connected equipment from power surges on the data lines.
- EMI and RFI noise filtering - Reduces line noise that can cause data loss and keyboard errors.
- ENERGY STAR for UPS - Establishes that the efficiency of the UPS is in the top 25% of the market as verified by third party testing
- Hot-swappable batteries - Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Premium power protection
The new APC Back-UPS Pro models provide premium battery backup and surge protection. Ideal for home or small office electronics, networking devices, gaming PCs and consoles. APC Back-UPS Pro models provide sinewave output, USB charging ports for your mobile devices, and increased runtime for your critical electronics.
Every connected SmartHome needs a UPS to help keep your wifi on and available, so that your SmartHome stays, well - smart!
Lorem ipsum dolor sit amet
At your Desk
Give yourself the time to save documents and gracefully shut down your computer without the harsh impact on your electronics of sudden power loss
Gaming System
A sinewave UPS is ideal for high-end gaming PC's, Xbox and PS4 Consoles, and connected hard-drives. Keep streaming and gaming when the lights go out
Wireless Router & IOT Devices
If the power goes out, stay connected to the internet and keep wifi-connected smarthome devices working by connecting your modem/wifi router to a UPS
Television and Cablebox/DVR
Don't lose your DVR recordings when the power flickers. A connected cable/satelite box will continue recording, even when the house is dark
Q: Can you adjust the alarm settings?
A: Yes, in the PowerChute software, UPSs that are connected to computers via the supplied USB cable can have their sensitivity settings adjusted, as well as specify what hours you want to disable the alarm, if desired.
Q: Is the PowerChute software required for this UPS? Will load-time and other data be visible on LCD without this software?
A: The BR1000MS Back-UPS Pro can be used out of the box (once the battery is connected), and the LCD screen will display the full array of information offered. The PowerChute software provides additional data and settings for your UPS.
Q: How do you turn off the alarm?
A: The Back-UPS Pro model provides a button on the front that can mute any audible alarm caused by an event.
Q: How long will this UPS power my system when the power goes out?
A: Runtimes of any UPS will vary based on the amount of power required by your connected devices. The LCD screen on a Back-UPS Pro model will display the estimated runtime based on the current power load of products plugged into the UPS.
| Limited Warranty | 3 Year |
| Battery Chemistry | Lead Acid |
| Hot Swappable | Yes |
| Backup/Run Time (Full Load) | 3.70 Minute |
| Typical Battery Recharge Time | 16 Hour |
| Package Contents |
|
| Environmentally Friendly | Yes |
| Environmental Certification | RoHS |
| cTUVus | |
| Energy Star | Yes |
| Input Voltage | 120 V AC |
| Output Voltage | 120 V AC |
| Waveform Type | Sine Wave |
| Input Voltage Range | 88 V AC - 147 V AC |
| 88 V AC - 147 V AC |
| Weight (Approximate) | 22.49 lb |
| Color | Black |
| Form Factor | Tower |
| Height | 10.2" |
| Width | 3.9" |
| Depth | 14.5" |
| Product Type | Line-interactive UPS |
| Manufacturer Part Number | BR1000MS |
| Manufacturer Website Address | http://www.schneider-electric.com |
| Packaged Quantity | 1 Each |
| Manufacturer | Schneider Electric SA |
| Product Model | BR1000MS |
| Product Name | Back-UPS Pro BR1000MS 1.0KVA Tower UPS |
| Product Line | Back-UPS Pro |
| Brand Name | APC by Schneider Electric |
| Application/Usage | Modem |
| Workstation | |
| Telecommunication | |
| Desktop Computer | |
| Plug/Connector Type | NEMA 5-15P |
| Receptacle Type | NEMA 5-15R |
| Transfer Time | 10 ms |
| Receptacle Detail | 4 x NEMA 5-15R |
| 6 x NEMA 5-15R |
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be ship to international destinations.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
