Key Digital 4 Input 2 Mirrored Output Presentation Switch, Mirrored HDMI And HDBaseT Output For Presenter's Confidence Monitor -KD-PS42
-
HDMI and HDBaseT inputs for integration with Key Digital wallplate transmitter
-
Auto Switching selects a newly connected source and moves away from a newly disconneced source
-
Mirrored HDMI and HDBaseT output for Presenter's confidence monitor
-
Part of a complete AV singal management solution for conference spaces.
Introduction
Key Digital KD-PS42 is a 4K/18G KD-App Ready Presentation Switcher kit with CEC Manager, auto switching, and audio de-embedding creating a user-friendly, simplified presentation system. KD-PS42 features three HDMI and one HDBaseT input which integrates natively with Key Digital wall plate HDBaseT transmitters. Mirrored HDMI and HDBaseT outputs enable audience + presenter views and the HDBaseT output marries in with the included KD-X40MRx for integrating monitors or projectors up to 40m / 131ft away when the selected source is outputting 4K/UHD (up to 70m / 230ft at 1080p). Designed for professional audio video installations in conference rooms, board rooms, classrooms, lecture halls, auditoriums, and more, KD-PS42 enables multiple video sources to be displayed on up to two connected displays while analog (balanced/unbalanced) and digital (PCM) audio de-embed ports feed audio of the selected source into an amplifier, DSP, or sound bar. Integrating KD-PS42 with KD-AMP220 and KD-CAMUSB will enable an app-ready all-in-one solution for control of video switching, sound and speech enforcement, and PTZ camera control. Key Digital CEC Manager enables basic controls of the connected displays for a simplistic all-in-one integration system. KD-PS42 presentation switcher supports all SD, HD, VESA and Ultra HD/4K video standards with HDR header information included in a variety of 4K EDID handshakes. In addition to IR, RS-232, and TCP/IP control, KD-PS42 can also be controlled via trigger voltage and features status monitoring LEDs.
Features
- Presentation Switcher Kit: Includes KD-PS42 and KD-X40MRx. Add KD-X2x1WDTx or KD-2x1WVTX wall plate HDBaseT transmitter for plug-in on walls, floor and table boxes
- Presentation Switching: 3 HDMI, 1 HDBaseT source selection by push button, IP, RS-232, IR, auto switching, or trigger control
- Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Auto-Sensing: Automatic selection of newly detected source and switching from newly disconnected source when enabled
- CEC Manager: Power, volume, and muting controls of the connected display/ projector without any additional control wiring. Selection of desired CEC command recipient
- Audio De-embedding: Audio of the selected source is de-embedded at the unit’s analog L/R balanced/unbalanced and PCM digital audio connectors
- KD-AMP220 Control Mode: Command forward to KD-Amp220 for an all-in-one user-friendly control UI of video switching, audio and speech enforcement
- HDCP Licensing: Fully licensed and compatible with HDCP 2.2
- Power Over HDBaseT: Rx unit (included) and wall plate Tx unit (sold separately) powered by KD-PS42
- Installation: Half-rack width with rack mounting ears included
- Signal Extension on HDBaseT Input and Output: 4K/UHD (18G) up to 40m / 131ft, 1080p up to 70m / 230ft
- Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
- Unit Control Mode: Provides TCP/IP and RS-232 control and status of/from Tx unit
- EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the output/display 1
- Surround Sound Audio Support: DTS-HD Master Audio, DTS:X, Dolby TrueHD, Dolby Atmos
- KD-App Ready: Network scan & detect populates pre-built GUI including connected display/projector controls via CEC Manager
Additional Features
- HDR10: More life-like images through a greater range of luminance levels
- Resolution Support: Supports SD, HD, and VESA (VGA, SVGA, XGA, WXGA, SXGA, UXGA) up to 4096x2160p
- Full Buffer System: Manages TMDS re-clocking / signal re-generation, HDCP authentication to source & display, and EDID Control handshake
- EDID Management: Internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the output/display 1
- TMDS re-clocking: Support for long HDMI connectivity using Key Digital HDMI cables
- Control System Support: Key Digital App ready. Compass Control Pro ready. Fully controllable by all IR, RS-232, and TCP/IP supported control systems via open API.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be ship to international destinations.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
