Key Digital 4x1 4K HDBaseT PoH Wall Plate Switcher (Transmitter Only) - KD-X4X1WUTX
The 4x1 4K HDBaseT PoH Wall Plate Switcher from Key Digital is a transmitter that features 2 x HDMI ports, 1 x DisplayPort, and 1 x USB Type-C port for presentation switching. The 4-input ports can be selected by a push button or via IP control. It is designed to be controlled via an RJ45 LAN port and connected to receivers like the KD-X100MRx black box HDBaseT receiver, the KD-UPS52U, and KD-UPS72U presentation switchers (available separately). This wall plate switcher supports up to 4096 x 2160 resolution at 60 Hz. A signal extension is supported up to 328' via 4K/UHD resolution and up to 492' via 1080p resolution. This unit is designed for installation in a standard US three-gang box.
- PTZ USB camera integration marries natively with KD-CAMUSB for full PTZ control via KD-App
- Supports up to 4096 x 2160 or 3840 x 2160 at 24, 25, 30, 60 Hz at 4:4:4 (signals up to 18 Gb/s bandwidth)
- Automatic selection of newly detected source and switching from newly disconnected source when enabled
- CEC Manager for power, volume, and muting controls of the connected displays/projectors without any additional control wiring
- Network scan and detect populates pre-built GUI including connected display/projector controls via CEC Manager
- Audio of the selected source is de-embedded at the unit's analog L/R balanced/unbalanced connector
- Fully licensed and compatible with HDCP 2.2
- HDR10 and Dolby Vision allow for life-like images through a greater range of luminance levels
- Wall plate unit powered by Rx/presentation switch unit (available separately)
- Full Buffer System manages TMDS reclocking / signal regeneration, HDCP authentication to source and display, EDID Control handshake, and Hot-Plug detection voltage
- EDID Management features an internal library with 15 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from the Rx display/device
- Wall plate collects line-of-sight IR from remote without external IR wiring
- RS-232 bidirectional control to and from the transmitter and receiver/presentation switch unit
- Provides TCP/IP and RS-232 control and status of/from transmitter unit
- Support for Dolby TrueHD, Dolby Digital Plus, Dolby Atmos, and DTS-HD Master Audio
- Key Digital app ready, Key Digital Management Software Pro (KDMS Pro) ready, and Compass Control Pro ready
- Fully controllable by all TCP/IP supported control systems via open API including Compass Control Pro, AMX, Crestron, KNX, RTI, Savant, URC, and Leviton
- HDMI, DisplayPort & USB Type-C Switching
- Push Button or IP Control
- USB Host and Device Ports
- Audio De-Embedding
- Power over HDBaseT
- Up to 328' Signal Extension via 4K/UHD
- Full Buffer System
- EDID Management
- IR Sensor
- RS-232 Bidirectional Control
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be ship to international destinations.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
