Ribbon Managed Packet Transport Edge Device • Uses Ribbon’s industry proven IP Wave rNOS operating system -NPT 1012D
The NPT 1012D is an extremely compact edge device supporting Ethernet, Circuit Emulation Services (CES) MPLS-TP and IP/MPLS. The NPT 1012D supports two form factors, a hardened DIN-rail form factor optimized for remote locations with strict environmental and size requirements. A rack mountable form factor which uses a special 19” rack adapter allowing 2 NPT 1012Ds to be mounted side-by-side. In both its hardened DIN-rail form factor, or its 19” rack mountable form factor it supports 32 Gbps switching capacity, this makes it a perfect fit for operators looking for a flexible fully managed packet transport edge device.
The NPT 1012D uses Ribbon’s industry proven IP Wave rNOS operating system to support Ethernet, IP/MPLS, MPLS-TP, segment routing and PON. The IP Wave rNOS streamlines multiservice networks by combining end-to-end service delivery with mission-critical grade assurance and control. With such a rich and robust feature set NPT 1012D is well suited for a wide variety of applications and networking scenarios. These include a gateway for mission-critical services, wholesale service delivery, and business VPN connectivity services. As with all of Ribbon’s NPT portfolio, NPT-1012 is managed by Ribbon’s Muse software suite.
NPT 1012D Benefits and Features
- Hardened Din Rail Switch
- Compact Multiservice Edge
- Low Power
Packet
Switch: 32 Gbps Services: MEF CE2.0 (E-Line, E-LAN, E-Tree, E-Access) PN and VPN based Ethernet and IP, MPLS-TP Traffic Interfaces: 4 x 10/1GE (SFP+), 4 x 100/1000 Base-T (RJ45)
TDM
Services: CES (SAToP, CESoP SN) 4x E1/T1 (per smart SFP), 4 x STM-16/OC-48 (per smart SFP)
WDM
Colored C/DWDM, Tunable G.709
Timing & Syncronization
Built-in GNSS receiver, SyncE with ESMC, 1588v2, External timing 1PPS and TOD, Internal Stratum 3 clock (holdover state), Primary and secondary sources (supports SSM bits), ACR, DCR, loop timing on SAToP, and SNTP
Protection & Restoration
RSTP/MSTP, G.8032 Ethernet Ring Protection (ERP), MPLS-TP FRR, 1:1 Linear protection, PW Redundancy (PWR), multi segment-PW, IEEE 802.3ad Ethernet Link Aggregation (LAG) with LACP, Multi-chassis LAG (MC-LAG) Aggregation (LAG) with LACP, Multi Chassis LAG (MC-LAG)
OAM
Ethernet OAM - IEEE802.3ah; IEEE 802.1ag and ITU-T Y.1731 PM, IP OAM - BFD, Ping, Trace-route, TWAMP ; MPLS-TP OAM - G8113.2, RFC5860, BFD ; MPLS OAM – Ping/Traceroute MPLS; RFC 2544 Generator, Y.1564; LLDP; DHCP Relay; Streaming Telemetry; sFlow ; Link Delay-Measurement
Traffic Management
Traffic classification (based on Port, VLAN, Port+VLAN, IEEE 802.1p and DSCP), diffserv based TM, network Connection Admission Control (CAC), 8 Classes of Service (CoS)
Topologies
Mesh, dual homing , multi-ring, ring, star, linear
Security
Control-plane and management plane protection, Authentication, Authorization, and Accounting (AAA), RADIUS , Terminal Access Controller Access-Control System Plus (TACACS+), Secure Shell (SSH), Layer 2 and Layer 3 ingress Firewall filters (ACL) ,Unicast Reverse Path Forwarding (Unicast RPF), IEEE802.1x
DATASHEET
(Manufacturer Standard Warranty) - Not Clear what product you need, or can't find your specific product/service part number? Call us +44 330 043 2524 | You can also use the quote request page
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be ship to international destinations.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
