The Supermicro AOC-C25G-I2S 25 Gigabit Ethernet Adapter is one of the most compact and scalable 25G Ethernet adapters for today's demanding data center environments. Based on the latest Intel® network controller E810-XXVAM2, it addresses the demanding needs of the next-generation data center. The AOC-C25G-I2S is designed in a proprietary and small MicroLP form factor to fit Supermicro MicroCloud 8/10-node systems.
FEATURES
- Dual 25GbE SFP28 Connectors, backwards compatible 10GbE
- MicroLP Form Factor
- PCI-E 4.0 x8, backward compatible to PCI-E 3.0 x8
- Intel E810-XXVAM2 Ethernet Controller
- NC-SI for remote management
- RoHS compliant 6/6
SPECIFICATIONS
- General
- Intel E810-XXVAM2 Ethernet Controller
- MicroLP Form Factor
- Dual SFP28 ports
- PCI-E 4.0
- Application Device Queues (ADQ)
- Dynamic Device Personalization (DDP)
- Host Interface
- PCI-E v4.0
- Backward compatible with PCIe v3.0
- Message Signal Interrupt (MSI-X)
- Networking Features
- Jumbo Packet (9K Max)
- Teaming
- Virtual LANs 802.1q VLAN tagging
- Stateless Offload Features
- TCP, UDP, IPv4, IPv6 checksum offload
- Large Send Offload
- Receive Segment Coalescing
- TCP segmentation Offload (TSO)
- UDP Segment Offload (USO)
- Large Segment Offload (LSO)
- Receive Side Scaling (RSS)
- Virtualization Features
- VXLAN
- NVGRE
- Geneve
- SR-IOV
- 768 Virtual Station Interface (VSI)
- 8 Physical Functions (PF)
- Microsoft VM Queue
- VMWare NetQueue
- DPDK Support
- QoS: Priority-based Flow Control (802.1Qbb)
- Enhanced Transmission Selection (802.1Qaz)
- Manageability
- Network Controller Sideband Interface (NC-SI)
- Asset Management with Thermal Sensors
- RDMA over Converged Ethernet (iWARP and RoCE)
- iWARP
- RoCEv2
- Data Center Bridging
- Remote Boot
- UEFI PXE Boot
- Data Center Bridging
- Enhanced transmission – IEEE 802.1Qaz
- Priority based Flow Control – IEEE 802.1Qbbb
- Edge Virtual Bridging - IEEE 802.Qbg
- Power Savings
- ACPI Compliant power management
- Pass through Energy Efficient Ethernet (IEEE802.3az-2010)
- Cables Support
- SFP28 Direct Attach Copper cables
- Fiber-optic cables (with required optional SFP28 transceivers)
- Power Consumption
- Maximum power consumption: 10.5W
- Operating Conditions
- Storage temperature: -40°C to 70°C (-40°F to 158°F)
- Storage humidity: 90% non-condensing relative humidity at 35°C
- Physical Dimensions
- Card PCB dimensions: 113mm (4.46in) x 39mm (1.54in)
- Supported Platforms
- MicroCloud 8/10 node systems
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be ship to international destinations.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
